Marras Quad Front Panel

A wide-capacity front panel built for secure magazine carriage, modular integration, and mission-specific loadout flexibility.

The Marras Quad Front Panel is designed to carry four 5.56 mm rifle magazines, including AR-15 and R-20 Rahe magazines, in a stable and accessible configuration. The magazines are retained by a hook-and-loop secured removable 100 mm elastic insert, which keeps the loadout secure while allowing the internal setup to be changed later if needed.

The insert system also allows future conversion for carrying three 7.62 mm rifle magazines. In addition to magazines, the internal layout makes it possible to carry other items of similar size, such as radios, compasses, GPS devices, or other field essentials.

For additional retention, optional elastic cord retainers can be fitted over the magazines. The panel is made from laminated fabric and attaches to the front of the plate carrier via hook-and-loop. With an overall width of approximately 30 cm, it extends about 2.5 cm beyond each side of a standard-size plate carrier.

Drainage holes on the bottom and sides allow water to escape and also serve as routing points for elastic cord used to secure extra gear such as tourniquets, chem lights, or textile restraints. The upper straps allow attachment to MOLLE platforms in a manner similar to the front panel system currently used by the Estonian Defence Forces. The panel can also be configured with horizontal or vertical MOLLE-compatible clips or with G-hooks.

Side loops allow the installation of standard buckles or quick-release hardware such as ROC and FirstSpear. For the most stable setup, the panel can be attached directly to the sides of the plate carrier using quick-release buckles. It can also be used as part of a chest rig when fitted with appropriate hardware.

Features

• Designed to carry four 5.56 mm rifle magazines.

• Removable 100 mm elastic insert for secure magazine retention.

• Can be adapted in the future for carrying three 7.62 mm rifle magazines.

• Attaches via MOLLE straps or buckles and interfaces with the hook-and-loop front panel of a plate carrier.

• Laser-cut MOLLE on the front for additional pouch and accessory attachment.

• Attachment points for optional elastic cord retainers for 5.56 mm magazines.

• Side attachment points for buckles or quick-release hardware.

• Drainage holes on the sides and bottom for water release and elastic cord routing.

• Can also carry similarly sized items such as radios, compasses, GPS units, and other field gear.

Technical Specifications

• Weight: 185 g

• Dimensions: 310 × 150 × 15 mm

• Material: Laminated Foxdura 500D, NIR

• Attachment options: G-hooks, horizontal buckle, vertical buckle, or no buckle

• Compatibility: Plate carriers with hook-and-loop front panel and MOLLE attachment options

• Design and manufacture: Designed and made in Estonia by Marras